| |
- Conforming to Standards : IEC 947-5-1, EN 60 947-5-1,
IEC 337-1, VDE 0660-200
- Impact-resistance double insulated polypropylene,
coloured yellow throughout
- Approved to UL listed A600-Q600 & CSA A600-Q600
- IP 65 ( to IEC 529) protection against ingress
of dust and water
- Double insulation to class 11 IEC 536
- Ambient air temperature range -25°C to + 75°C
- Humidity depending on ambient temperature up to
95% RH
- Mechanical durability of 1 million operations
- Light weight
- Dual or single pressure push-buttons
- Positive feel switching
- Mechanical interlocks on opposite motions
- Shrouded rubber sleeve with stepped entry diameter
for cable Ø8... Ø26 mm
- Rated insulation voltage 600V conforming IEC 947-1
- Slow break contact operation model
- Mushroom head emergency stop push-button with
positive operation to IEC 947-1
- Terminal identification by numbers to CENELEC
EN 50013
- Short circuit protection 10A or less
- Operating rate up to 3600 operations/hour at 5A
( well in excess of crane duty)
- Approved by VDE, SEV, ASE, DEMCO, SEMCO and others
- Easy to operate ergonomic design with recessed
push-button position ( helps prevent inadvertent
operation)
|
|
- Enclosure IP65
- Robust glass fibre reinforced plastic casing
- Phase Lock Loop ( PLL)
- Both power source and output relays with fuses
- Synchronous transmission encoding and decoding
- Changing frequency manual/auto
- Auto signal searching
- No. of functions and parameters setting > 57
- No. self diagnostics > 28
- No. of alarms > 28
- Frequency renage 415 ~ 483 MHz
- Operating temperature -30°C ~ 75°C
- Relays 10A/250V
- ID Code : 32 Bit
- Hamming Code ≥4
- Response time = 65ms
- Static > 15kV
- Surge > 4kV
- Field Strength > 10V/m
|
|
|
Transmitter
- Compact design
- 3 stage power indicator
- Buzzer / Alarm
- Removable key ( waterproof)
- Changeable pushbutton symbols
- Shock resistant design
- Password power on 4 digits
- Output power ≤ 10mW
- Normal power consumption approx. 40mA
- Harmonic ≥ 65dB
- Modulation ≤ 2.5kHz
|
Receiver
- Alarm and signal light output
- Power source detector
- Anti power interrupt circuit
- Relay's contacts detector circuit
- Shock resistant
- Dual antenna against multi-path reflection
- Enhanced watch dog circuit
- 3 superheterodyne
- Frequency deviation tracing circuit
- Sensitivity ≥ 110dBm
- Adjacent channel restrain > 80dB
|
- 4, 8 10 or 12 keys. 16 control commands plus 2
emergency stop buttons and power unit safety system.
- IP 55 ( NEMA 4) Optional IP65
- 1 or 2 stage pushbutton
- Emergency stops for immediate standstill
- Catch release
- Linear levels
- Optional display on selected models
- Customised transmitters
- Tandem operations
- Rotary switch
- 3 year warranty on electrical components
- Designed with roll bar combining non-tiring operation
with safety requirements
- Optional code plug facility
|
|
Options
Available ( model dependant)
- Rubber protective kit
- Optional infrared start
up. Crane radio control may only be
activated if there is “visual contact”
between transmitter and receiver. This prevents
unattended use of the crane
- Time delayed outputs
- Programmable outputs
- Output checking
- Transmitter tilt switch
- Explosion protected
transmitter
- Auto Power Off
- Frequency synthesizer
- UHF radio modules with
customer selectable frequency
- Tandem operation
- Handover facilities
- Frequency scanning
- Safety interlocking
via code pugs
- Data feedback to transmitter
- Programmable joystick
output curves ( analogue systems)
|
|
|
|
|
|
|
Options Available
- Open cab or fully glazed with toughened glass
- Fixed or opening windows
- Fixed to structure or traversing with crab unit
- Power Sockets
- Fully adjustable seating
- Air Conditioning
- Heater
- Internal Lighting
- Load Displays
- Choice of joystick or radio controls
- Emergency escape harness
|
